Input Voltage:AC88-132VAC/176-264VAC
Rated Power:40W
Output current(12V):3.33A
Output Voltage:DC12
Frequency:47-63HZ
PROTECTION OVERLOAD Above 105% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER-VOLTAGE 5.75-6.75V 13.8-16.2V 17.25-20.25V 27.6-32.4V
Protection type: Shut down o/p voltage, re-power on to recover
FUNCTION DC OK ACTIVE SIGNAL (max.) 3.75 ~6V/ 50mA 9 - 13.5V/40mA 11.5-16.5V/40mA 18-27V/20mA
ENVIRONMENT WORKING TEMP. -20 ~ +70C (Refer to "Derating Curve")
WORKING HUMIDITY 20 - 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85C ,10- 95% RH
TEMP. COEFFICIENT 0.03%/C (0 - 50C)
VIBRATION Component: 10 - 500Hz, 2G10min./1 cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY &EMC
(Note 4) SAFETY STANDARDS UL508, TUV EN60950-1 approved
WITHSTAND VOLTAGE l/P-0/P:3KVAC l/P-FG:2KVAC 0/P-FG:0.5KVAC
ISOLATION RESISTANCE l/P-O/P, l/P-FG, 0/P-FG:100M Ohms/500VDC/25C/70% RH
EMC EMISSION Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2.-3
EMC IMMUNITY Compliance to EN610004-2,3,4,5,6,8,11, EN55024.EN61000-6-1 ,EN61204-3, light industry level, criteria A
OTHERS MTBF 584Khrsmin. MIL-HDBK-217F (25C)
DIMENSION 22.5*90*100mm (W*H*D)
PACKING 0.17Kg; 72pcs/13.2Kg/0.91CUFT
NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3.Tolerance : includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
